Strong gloss for surfaces that work hard
Parsilon Alkyd Gloss Enamel, with high whiteness and hiding power, creates a brilliant, uniform surface. Keeping its gloss over time, it has strong adhesion, excellent washability and abrasion resistance, and long-lasting durability. Smooth brushability and easy application also make painting simpler.
Choose a pack size
Coverage figures are approximate and theoretical. They vary with the surface type, absorbency and texture, and with the application method. For an accurate estimate, a trial application on the actual surface is recommended.
16 kg120 m²
4 kg30 m²
1 kg8 m²
0.25 kg2 m²
1Touch dry120 min
2Between coats20 h
3Fully dry24 h
| Coverage per coat | 12–15 m² per kg |
|---|---|
| Pack sizes | Quarter 0.25 / Quart 1 / Gallon 4 / Tin 16 kg |
| Touch dry | 120 min |
| Recoat time | 20 h |
| Fully dry | 24 h |
| Thinning | Up to 15% by weight |
| Application temp. | 20 to 30 °C |
| Shelf life | 3 years |
| Finish | Gloss |
| Thinner type | Parsilon T1 thinner |
| Shades | Light and dark cream, light and dark brown, light and dark grey, light and dark blue, light and dark green, olive green (Gol-mash), red, black |
The surface must be dry, sound and free of dust, grease, moisture and loose or flaking layers.
On raw plaster, first apply an oil-based primer, then repair with oil-based putty and sand. On ferrous metal, remove rust and apply an alkyd anti-rust primer. Apply the oil paint in at least two coats with 16 to 24 hours between coats.
Paint in dry, moderate weather, at about 10 to 30 °C and relative humidity below 80%.