Alkyd Matt Enamel Paint

Parsilon Alkyd Matt Enamel is a decorative coating based on alkyd resin, formulated to create a smooth velvety finish, completely eliminate light reflection, and conceal substrate unevenness and surface imperfections for interior building spaces.

Suitable for use on all plaster, concrete, wood, and metal surfaces in interior spaces; especially ceilings, living room and hall walls, office environments, and surfaces requiring a velvet finish, zero light glare, and hiding of substrate flaws and ripples.

• Excellent whiteness and hiding power
• Outstanding washability resistance
• Superior adhesion strength
• Long-lasting lifespan and high durability
• Smooth and effortless brushability

Surface Preparation: Ensure the target surface is completely cleaned of any dust, grease, oil, and contaminants.
Repair: Any surface cracks, defects, or decay must be repaired and leveled prior to painting.
Priming: For optimal hiding power and application efficiency, apply an appropriate primer coat before the topcoat application.
Dilution: Dilute using Parsilon T1 Thinner only.
Dilution Ratio: The required thinner percentage varies depending on application tools. Under standard conditions, use 10%–20% thinner by paint weight for roller and brush application, and 20%–25% for spray gun application.

Surface dry (touch dry): 4 hours
Recoat time (next coat): 16 to 20 hours
Note: Drying time may vary depending on ambient temperature, humidity, and applied film thickness.

Can be stored for up to 24 months in its original unopened packaging in a cool, dry place away from direct sunlight.

Quart, Gallon, Drum/Pail (Halab).

Keep out of reach of children. Store away from heat sources and direct sunlight in a covered, well-ventilated area. If ingested, do NOT induce vomiting; seek medical attention immediately. Ensure adequate ventilation during indoor application. In case of contact with eyes, flush immediately with plenty of clean water and seek medical advice.