Acrylic Multi Primer Paint

Parsilon Acrylic Multi Primer Paint is a water-based paint produced from the finest acrylic resins and best paint raw materials for painting and priming interior and exterior building surfaces.

This product can be used on all interior and exterior building surfaces, including plaster, cement, concrete, brick and wood. It can also be applied easily over surfaces previously painted with water-based paints.

• Excellent spreadability on the surface
• Excellent adhesion to the surface
• Excellent hiding power on the surface
• Suitable for interior and exterior building facades
• Water-based and environmentally friendly
• Smooth and easy brushability
• Non-toxic, with no unpleasant odour

1- Clean the surface to be painted of any dust and contamination.
2- If the surface has cracks or decay, it must be repaired. Parsilon acrylic putty can be used to repair it and obtain a uniform, smooth surface.
3- A temperature of +5 to +35 °C is the best for applying this product.
4- Dilute the multi primer with clean water only.
5- Depending on the application tool, the amount of water required for dilution varies, but under normal conditions you can dilute the paint by adding 15 to 25 % water by weight of the paint and apply it with a roller or brush.

6 to 8 m² per litre (actual consumption depends on the type of substrate, film thickness and environmental conditions).

Touch dry: 45 minutes
Recoat time (next coat): 2 to 4 hours
Drying time may vary depending on temperature, humidity and applied film thickness.

This product can be stored for up to 36 months in its original packaging in a cool, dry place, away from direct sunlight and freezing.

Gallon, 2.5 Gallon, 5 Gallon

In case of contact with eyes or mouth, rinse with plenty of water and seek medical attention if necessary. Do not pour this product into the sewer. After finishing work, wash your hands, painting tools and any spilled material on the floor with warm water and soap, and dry them.