Acrylic Swimming Pool Paint

Parsilon Acrylic Swimming Pool Paint is a water-based paint produced from the best acrylic resins and special additives for waterproofing and coating swimming pools and ponds.

This product can be used for waterproofing and coating all types of swimming pools, freshwater tanks and agricultural ponds.

• Excellent spreadability on the surface
• Excellent adhesion to the surface
• Excellent resistance to different weather conditions
• Excellent resistance to cracking and abrasion
• Excellent resistance to mould, moss and algae
• The best replacement for all traditional insulation materials
• Water-based and environmentally friendly
• Smooth and easy brushability
• Non-toxic, with no unpleasant odour

1- Clean the surface to be painted of any dust and contamination.
2- If the surface has decay, it must be cleaned completely.
3- Use only clean water to dilute the pool paint.
4- Apply the pool paint in three coats.
5- Apply the first coat as a primer, using Parsilon Pro Primer or by diluting the pool paint with 35 % water.
6- Apply the second coat diluted with 15 to 20 % water and the third coat without adding water.
7- Depending on weather and environmental conditions, wait at least 4 to 6 hours between coats.
8- A temperature of +5 to +35 °C is the best for applying this product.
9- Using this product in stormy and rainy weather is not recommended.

8 to 10 m² per kg (actual consumption depends on the type of substrate, film thickness and environmental conditions).

Touch dry: 1 hour
Recoat time (next coat): 4 to 6 hours
Drying time may vary depending on temperature, humidity and applied film thickness.

This product can be stored for up to 36 months in its original packaging in a cool, dry place, away from direct sunlight and freezing.

Quart, Gallon, 2.5 Gallon, 5 Gallon

In case of contact with eyes or mouth, rinse with plenty of water and seek medical attention if necessary. Do not pour this product into the sewer. After finishing work, wash your hands, painting tools and any spilled material on the floor with warm water and soap, and dry them.