Supersun Semi-Plastic Paint

Parsilon Supersun Semi-Plastic Paint is a water-based paint produced from the best copolymer resins and finest paint raw materials for painting and coating of interior building surfaces.

This product can be used on all interior building surfaces, including plaster, cement, concrete, brick and wood. It can also be applied easily over surfaces previously painted with water-based paints.

• Good hiding power
• Excellent adhesion to the surface
• Fast and suitable drying time
• Water-based and environmentally friendly
• Long-lasting durability
• Smooth and easy brushability
• Non-toxic, with no unpleasant odour

1- Clean the surface to be painted of any dust and contamination.
2- If the surface has cracks or decay, it must be repaired. Parsilon acrylic putty can be used to repair it and obtain a uniform, smooth surface.
3- For the best results in coverage and working efficiency, apply a suitable primer coat before the main paint.
4- A temperature of +5 to +35 °C is the best for applying this product.
5- Dilute Supersun Semi-Plastic paint with clean water only.
6- Depending on the application tool, the amount of water required for dilution varies, but under normal conditions you can dilute the paint by adding 25 to 35 % water by weight of the paint and apply it with a roller or brush.

7 to 9 m² per litre (actual consumption depends on the type of substrate, film thickness and environmental conditions).

Touch dry: 45 minutes
Recoat time (next coat): 2 to 4 hours
Drying time may vary depending on temperature, humidity and applied film thickness.

This product can be stored for up to 36 months in its original packaging in a cool, dry place, away from direct sunlight and freezing.

Gallon, 2.5 Gallon, 5 Gallon

In case of contact with eyes or mouth, rinse with plenty of water and seek medical attention if necessary. Do not pour this product into the sewer. After finishing work, wash your hands, painting tools and any spilled material on the floor with warm water and soap, and dry them.